When our daily energy requirements are met by ‘Green Energy’, then we are using resources such as wind, tides or geothermal heat. They are thought to be ‘Green’ due to the fact that they are easily restored and natural. When considering elements such as Wind Power and Windmills, in many cases we are looking back at the history of energy production. This idea is preserved by the use of technology, eco-efficient options and planet friendly alternatives.
In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. Moving on from this there are the Photovoltaic Panels (PV’s) which can generate electricity from your roof. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. Not all ‘Green Energy’ is new – by considering Wind Power and Hydropower we are looking at some of the oldest forms of energy production.
Thermal Solar Energy – Typically referred to as Solar Energy this is mainly made up of two types of Solar Panels – each using different methods to achieve similar results. To begin with, we have the concept of drawing energy from the Sun to heat water – known as Solar Water Heating Collectors. Secondly, Photovoltaic heat collectors – often simply referred to as Solar Electrical Panels – which transform the solar radiation into electricity. Obviously situated away from blockages such as chimneys etc., these Solar Panels need to be mounted on south facing roofs at an angle of 30 degrees from the horizontal.
Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit – all the way up to 2-5k for a full professional fitting.
Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. The ability to generate electricity is one of the UK’s main green strengths – as it has one of the larger Biomass legacies within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.
Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses – because of their yield of dry matter. Other less known materials within this field are Agricultural and Municipal Waste. To begin with, Agricultural Waste is often produced as part of the agricultural process overall. Municipal Waste such as food or wood can also be utilised as a biomass product.
Systems Based On Geo-Thermal Energy: By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. This system can go even further – if energy efficient items such as wind turbines or solar electrical panels are used.
Wind Energy: As an energy source, wind energy has to be one of the oldest forms of energy creation in history. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. With regard to wind generation, it is the UK that has the highest production within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production – as opposed to the current value of only 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. The financial recovery process takes around 6-9 months.
Then there is Hydropower – something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.
The Hydropower process uses a turbine that can convert the energy from one form into another. It is by either water ‘drop-offs’, or Natural River runs, that turbines can work through this process. ‘Micro-Hydro’ utilises a chunk of the outdated sluices and dam systems that have been killed off by the large national distribution methods. Whilst considered a smaller form of electrical output, this system is thought to be able to give some 200mW of capacity to the UK. Between 200 pounds and 3k per KW of energy output, is a good estimate of the overall cost of a project such as this.
It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.
It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. It is by gaining the right certificates that will provide opportunities and job security for the long term. Look for combined electrical and plumbing training, with a key emphasis on practical green systems and installation.
(C) Scott Edwards 2009. Pop over to Green Engineer Certification or CLICK HERE.